Product Introduction
Processing Capacity: 5-40t/h
Application Scope: Building materials, metallurgy, mineral processing, chemical industry, cement and other industries
Heat Source Options: Coal, natural gas, electricity, biomass pellets, oil, firewood, etc.
Environmental Protection Configuration: Equipped with multi-stage dust removal equipment such as cyclone dust removal, pulse dust removal and water dust removal.
Applicable Materials: Slag, calcium carbide slag, furnace slag, clay, river sand, quartz sand, granulated blast furnace slag and other materials
Product Advantages
- Fast Drying
The slag/furnace slag dryer is resistant to high temperatures and can dry materials with high-temperature hot air.
- Wide Range of Drying Raw Materials
Adopting a co-current drying process of materials and hot air flow, the machine has a wide application range. It is suitable for drying various raw materials such as coal, slag and iron powder, as well as various bulk materials in metallurgy, chemical and other sectors.
- Large Processing Capacity
The slag dryer features large processing capacity, low fuel consumption and low drying cost.
- Strong Expandability
It has excellent expandability with production allowance considered in the design, eliminating the need for equipment replacement even with a slight increase in output.
- Low Wear
The equipment adopts a self-aligning supporting roller structure with a perfect fit between supporting rollers and rolling rings, which greatly reduces wear and power consumption.
- Advanced Design & Strong Overload Resistance
The specially designed retaining wheel structure greatly reduces the horizontal thrust caused by the inclined operation of the equipment. With strong overload resistance, the cylinder runs stably and reliably.
Working Principle
Technical Parameters
Technical Parameters of Slag Dryer
| Model (mm) | Inclination (%) | Rotating Speed (r/min) | Inlet Air Temperature (℃) | Power (kw) | Production Capacity (t/h) | Weight (t) |
|---|---|---|---|---|---|---|
| Ф800×8000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.0 | 3.5 |
| Ф800×10000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.5 | 4.5 |
| Ф1000×10000 | 3-5 | 3-8 | ≤700 | 5.5 | 1.0-3.5 | 5.6 |
| Ф1200×10000 | 3-5 | 3-8 | ≤700 | 7.5 | 1.8-5 | 14.5 |
| Ф1200×12000 | 3-5 | 3-8 | ≤700 | 11 | 2-6 | 14.8 |
| Ф1500×12000 | 3-5 | 2-6 | ≤800 | 15 | 3.5-9 | 17.8 |
| Ф1800×12000 | 3-5 | 2-6 | ≤800 | 18 | 5-12 | 25 |
| Ф2200×12000 | 3-5 | 1.5-6 | ≤800 | 18.5 | 6-15 | 33 |
| Ф2200×18000 | 3-5 | 1.5-6 | ≤800 | 22 | 10-18 | 53.8 |
| Ф2200×20000 | 3-5 | 1.5-6 | ≤800 | 30 | 12-20 | 56 |
| Ф2400×20000 | 3-5 | 1.5-5 | ≤800 | 37 | 18-30 | 60 |
| Ф3000×20000 | 3-5 | 1.5-5 | ≤800 | 55 | 25-35 | 78 |
| Ф3000×25000 | 3-5 | 1.5-5 | ≤800 | 75 | 32-40 | 104.9 |
